QHBake Candy Machine

¿Cómo se hace la jalea en una fábrica?

You’re probably wondering how jelly is made in a factory. After all, the basic ingredients are sugar, pectin, acid, and glucose syrup. Let’s take a look at the process in detail. Here, we’ll cover these ingredients in detail. Using a jelly making machine is a great way to start making your own jelly at home. And if you’re looking for a jelly-making machine for your own business, SaintyCo has you covered!

Pectina

The production of pectin is made by extracting it from fruit or vegetable raw materials. The plant material containing pectin is placed in a solution containing an acid or enzyme that breaks down the pectin to form soluble blocks. Then, pectin is separated from the solution by various separation processes. Depending on the degree of acidity and the desired DE content of pectin, different acid levels are used.

Pectin is an important food additive. It serves as a thickening, gelling and stabilizing agent. Most pectin used in food comes from the peel of apples and citrus fruits. It is a natural ingredient that undergoes several quality changes during the production process. This happens because pectic enzymes play a role in transforming pectin into a useful form for a variety of applications.

Azúcar

Jelly is made using pectin, a naturally occurring compound that is found in the cell walls of many plants. Pectin is variable in its chemical structure and plays a major role in the setting of jelly. The amount of sugar required for jelly manufacture is determined by the amount of pectin that is present in the fruit. The amount of sugar in a jelly recipe should be adjusted accordingly. For example, using a fruit that is only 3/4 ripe may not be necessary.

READ  ¿Cómo se fabrica la jalea en una fábrica?

A third key ingredient in jelly manufacturing is acid. The amount of acid used will depend on the level of active acidity in the fruit and its pH. It serves to neutralize the charge on the carboxyl groups in pectin. The pH of the product must be below 3.5 to enable the formation of a gel. It also helps the jelly become firmer. Most jelly manufacturers use granulated white sugar, although brown sugar may be used. While molasses can increase the sweetness of jam, it should not be used in jelly manufacturing.

Acid

The process of manufacturing acid jelly involves hydrolysis of sucrose to increase the boiling point and soluble solids concentration. Jelly is typically between 104-105degC, which is a few degrees higher than the boiling point of water. The difference in boiling point accounts for variations in atmospheric pressure and thermometer inaccuracies. The resulting jelly contains approximately 65% soluble solids. The process is not complicated, but it is critical to follow a few guidelines to achieve a consistent product.

First, it is necessary to determine how much acid to add. It can be measured by adding one teaspoon of extracted fruit juice to 1 tablespoon of rubbing alcohol. If the mixture forms a solid mass, it contains enough pectin naturally in the fruit juice to gel. If the mass is weak or insufficient, it is time to add some commercial pectin. If the amount of pectin is low, the result will be less than desired.

Jarabe de glucosa

Glucose syrup is a popular sweetener found in many commercial products, including jellies, jams, and fruit drinks. It is a non-crystallising substance that helps prevent crystallization in processed foods. Its non-crystalline properties also help preserve foods for longer. Jellies made with glucose syrup have smoother texture and a better shelf life than those made with other sweeteners.

READ  ¿Cómo se fabrica la gominola de espirulina en una fábrica?

Glucose syrup is used to replace sucrose in jelly manufacturing. Higher concentrations of glucose syrup reduce the sweetness. High concentrations can also lead to dextrose crystal formation in the product, which gives the finished product an undesirable taste and mouthfeel. Glucose syrup can be used to replace sucrose in jellies, as well as to add sweetness. It can also be used as a sugar substitute for non-sweet foods.

Capping

To manufacture jelly, a jelly-making machine is required. This machine contains several parts: sensors to detect the capacity of the ingredients, tubes, and guide rails. Electricity is used to power the machine, which contains parts that control the amount of electricity and convert it into useful capacities. A cooling system removes excess heat from the ingredients. Jelly is ready to sell in the market after the entire process is completed. It has many advantages over other candies.

The ingredients used to make jelly are heated using gas, electricity, or both. Then, the resulting jelly is hermetically sealed using a glass container. The jars should be filled 90% full, leaving a head space of about one inch. Immediately after filling, jar lids should be placed loosely, and then tightened within two to three minutes. This is done to exhaust the head space and allow the jelly to form a gel. The jars are then transferred to large tanks and cooked according to the recipe.

Equipo

The ingredients used in the factory manufacturing of jelly include citric acid, sugar, pectin, and flavoring. The next step is to remove any scum or foam from the mixture. The jelly then needs to be cooled before the next step. Before the process is complete, the jelly must be checked for quality and consistency in the laboratory. If there is no scum or foam, it will be sent to another stage for manufacturing.

READ  Recubrimiento de Gomitas de Vitamina en Fábrica

The jelly making machine contains sensors that detect the capacities of the ingredients, a transport system with tubes, and guide rails. An electric unit is also installed to supply power to the machine. The electric unit contains parts that control electricity and convert it into capacities. A cooling system is also installed in the machine to remove excess heat from the ingredients. A gummy jelly candy depositing line has rows of molds ranging from one to four.

Obtenga una cotización gratis de nuestra maquinaria para galletas y dulces

    Máquina automática para fabricar perlas Konjac para ventas - Proveedor y fabricante
    Modelo

    QH-200K 丨 QH-400K 丨 QH-400K 丨 QH-400K 丨 QH-1000K

    Capacidad

    200 kg / h 丨 400 kg / h 丨 600 kg / h 丨 800 kg / h 丨 1200 kg / h

    Longitud de la máquina

    3,5 m 丨 3,5 m 丨 5,5 m 丨 5,5 m 丨 6 m

    Línea de producción automática de piruletas para la venta - Fábrica de máquinas de dulces
    Modelo

    QH-150 丨 QH-300 丨 QH-450 丨 QH-600 丨 QH1200

    Capacidad de producción (kg / h)

    150 丨 300 丨 450 丨 600 丨 1200-2000

    Velocidad de depósito (n / min)

    30-55

    Condiciones de trabajo

    Temperatura: 20-25 ° C
    Humedad 55%

    Compre la línea de producción automática de galletas - Máquina industrial de galletas
    Modelo

    QH-280 丨 QH-400 丨 QH-600 丨 QH-800 丨 QH-1000 丨 QH-1200

    Capacidad de producción (kg / h)

    100 丨 250 丨 500 丨 750 丨 1000 丨 1250

    Longitud total (mm)

    29600 丨 64500 丨 85500 丨 92500 丨 125000 丨 125000

    Temperatura de horneado (℃)

    190-240 丨 190-240 丨 190-240 丨 190-240 丨 190-240 丨 190-240

    Compre el alimentador de masa para la fábrica de galletas Hard Biscuit Cracker
    Espesor de la hoja

    Ajustable

    Potencia (kW)

    1.22

    Velocidad (m / min)

    1,2-1,9 m / minuto

    Comprar máquina para hacer estallar Boba | Línea Boba Popping completamente automática QHP-200
    Modelo

    QHP-200, QHP-400

    Capacidad (kg / hora)

    200 kg / h, 400 kg / h

    Eléctrico

    80kw, 98,8kw

    Longitud de la máquina

    El 12m, el 14m

    Máquina de gominolas de CBD y comprar equipos de fabricación de dulces industriales comerciales
    Modelo

    QHG-40

    Capacidad (kg / hora)

    40 kg-50 kg / h

    Velocidad de depósito (veces / min)

    15-45

    Longitud de la máquina

    4m

    Energía

    6kw

    Aire acondicionado

    3PH

    Mezclador de masa de doble hoja (vertical) para la venta - Fábrica y proveedor
    Modo

    QH-30 丨 QH-40 丨 QH-60 丨 QH-80 丨 QH-120 丨 QH-240

    Energía

    0.85 / 1.1kw / hr 丨 0.85 / 1.5kw / hr 丨 1.5 / 2.4 kw / hr 丨 2.2 / 3.3 kw / hr 丨 3 / 4.5 kw / hr 丨 4 / 7.5 kw / hr

    Velocidad de mezcla

    123 / 185r / min 丨 114/230 r / min 丨 115/230 r / min 丨 125/250 r / min 丨 125/250 r / min 丨 125/250 r / min

    Velocidad del tazón

    12/24 r / min 丨 12/24 r / min 丨 10/20 r / min 丨 10/20 r / min 丨 10/20 r / min 丨 10/20 r / min

    Capacidad del cuenco

    34L 丨 48L 丨 68L 丨 84L 丨 122L 丨 240L

    Dimensión

    750 * 430 * 990 丨 920 * 510 * 1050 丨 950 * 550 * 1100 丨 1050 * 600 * 1150 丨 1200 * 690 * 1330 丨 1300 * 880 * 1580

    Bandeja de secado de goma para la venta de fábrica y fabricante
    Material

    PE + PP

    Tamaño

    800 * 600 * 70 mm

    Peso

    2,5 kg

    Volumen

    2-3 kg

    Ocultar

    Anchura máxima

    Productos

    Tabla de contenidoToggle Table of Content

    es_MXEspañol de México