QHBake godismaskin

Hur görs gelé i en fabrik?

You’re probably wondering how jelly is made in a factory. After all, the basic ingredients are sugar, pectin, acid, and glucose syrup. Let’s take a look at the process in detail. Here, we’ll cover these ingredients in detail. Using a jelly making machine is a great way to start making your own jelly at home. And if you’re looking for a jelly-making machine for your own business, SaintyCo has you covered!

Pektin

The production of pectin is made by extracting it from fruit or vegetable raw materials. The plant material containing pectin is placed in a solution containing an acid or enzyme that breaks down the pectin to form soluble blocks. Then, pectin is separated from the solution by various separation processes. Depending on the degree of acidity and the desired DE content of pectin, different acid levels are used.

Pectin is an important food additive. It serves as a thickening, gelling and stabilizing agent. Most pectin used in food comes from the peel of apples and citrus fruits. It is a natural ingredient that undergoes several quality changes during the production process. This happens because pectic enzymes play a role in transforming pectin into a useful form for a variety of applications.

Socker

Jelly is made using pectin, a naturally occurring compound that is found in the cell walls of many plants. Pectin is variable in its chemical structure and plays a major role in the setting of jelly. The amount of sugar required for jelly manufacture is determined by the amount of pectin that is present in the fruit. The amount of sugar in a jelly recipe should be adjusted accordingly. For example, using a fruit that is only 3/4 ripe may not be necessary.

Se även  Hur tillverkas sömngummi?

A third key ingredient in jelly manufacturing is acid. The amount of acid used will depend on the level of active acidity in the fruit and its pH. It serves to neutralize the charge on the carboxyl groups in pectin. The pH of the product must be below 3.5 to enable the formation of a gel. It also helps the jelly become firmer. Most jelly manufacturers use granulated white sugar, although brown sugar may be used. While molasses can increase the sweetness of jam, it should not be used in jelly manufacturing.

Acid

The process of manufacturing acid jelly involves hydrolysis of sucrose to increase the boiling point and soluble solids concentration. Jelly is typically between 104-105degC, which is a few degrees higher than the boiling point of water. The difference in boiling point accounts for variations in atmospheric pressure and thermometer inaccuracies. The resulting jelly contains approximately 65% soluble solids. The process is not complicated, but it is critical to follow a few guidelines to achieve a consistent product.

First, it is necessary to determine how much acid to add. It can be measured by adding one teaspoon of extracted fruit juice to 1 tablespoon of rubbing alcohol. If the mixture forms a solid mass, it contains enough pectin naturally in the fruit juice to gel. If the mass is weak or insufficient, it is time to add some commercial pectin. If the amount of pectin is low, the result will be less than desired.

Glukos sirap

Glucose syrup is a popular sweetener found in many commercial products, including jellies, jams, and fruit drinks. It is a non-crystallising substance that helps prevent crystallization in processed foods. Its non-crystalline properties also help preserve foods for longer. Jellies made with glucose syrup have smoother texture and a better shelf life than those made with other sweeteners.

Se även  Hur görs äppelcidervinägergummi?

Glucose syrup is used to replace sucrose in jelly manufacturing. Higher concentrations of glucose syrup reduce the sweetness. High concentrations can also lead to dextrose crystal formation in the product, which gives the finished product an undesirable taste and mouthfeel. Glucose syrup can be used to replace sucrose in jellies, as well as to add sweetness. It can also be used as a sugar substitute for non-sweet foods.

Capping

To manufacture jelly, a jelly-making machine is required. This machine contains several parts: sensors to detect the capacity of the ingredients, tubes, and guide rails. Electricity is used to power the machine, which contains parts that control the amount of electricity and convert it into useful capacities. A cooling system removes excess heat from the ingredients. Jelly is ready to sell in the market after the entire process is completed. It has many advantages over other candies.

The ingredients used to make jelly are heated using gas, electricity, or both. Then, the resulting jelly is hermetically sealed using a glass container. The jars should be filled 90% full, leaving a head space of about one inch. Immediately after filling, jar lids should be placed loosely, and then tightened within two to three minutes. This is done to exhaust the head space and allow the jelly to form a gel. The jars are then transferred to large tanks and cooked according to the recipe.

Utrustning

The ingredients used in the factory manufacturing of jelly include citric acid, sugar, pectin, and flavoring. The next step is to remove any scum or foam from the mixture. The jelly then needs to be cooled before the next step. Before the process is complete, the jelly must be checked for quality and consistency in the laboratory. If there is no scum or foam, it will be sent to another stage for manufacturing.

Se även  Hur gummimaskar tillverkas i en fabrik

The jelly making machine contains sensors that detect the capacities of the ingredients, a transport system with tubes, and guide rails. An electric unit is also installed to supply power to the machine. The electric unit contains parts that control electricity and convert it into capacities. A cooling system is also installed in the machine to remove excess heat from the ingredients. A gummy jelly candy depositing line has rows of molds ranging from one to four.

Få en gratis offert på våra kex- och godismaskiner

    Automatisk Konjac Pearl Making Machine för försäljning – Leverantör & Tillverkning
    Modell

    QH-200K丨QH-400K丨QH-400K丨QH-400K丨QH-1000K

    Kapacitet

    200 kg/h 丨 400 kg/h 丨 600 kg/h 丨 800 kg/h 丨 1200 kg/h

    Maskinens längd

    3,5 m 丨 3,5 m 丨 5,5 m 丨 5,5 m 丨 6 m

    Automatisk Lollipop produktionslinje till salu – Candy Machine Factory
    Modell

    QH-150丨QH-300 丨QH-450丨QH-600丨QH1200

    Produktionskapacitet (kg/h)

    150 丨300丨450丨600 丨1200-2000

    Insättningshastighet (n/min)

    30-55

    Fungerande skick

    Temperatur: 20-25°C
    Luftfuktighet 55%

    Köp automatisk kexproduktionslinje – industriell kexmaskin
    Modell

    QH-280丨QH-400 丨QH-600丨QH-800丨QH-1000 丨QH-1200

    Produktionskapacitet (kg/h)

    100 丨 250丨500 丨750丨1000 丨1250

    Total längd (mm)

    29600丨64500丨85500丨92500丨125000丨125000

    Baktemperatur (℃)

    190-240 丨190-240丨190-240丨190-240 丨190-240丨190-240

    Köp degmatare till Hard Biscuit Cracker Biscuit Factory
    Plåttjocklek

    Justerbar

    Effekt (kW)

    1.22

    Hastighet (m/min)

    1,2-1,9m/minut

    Köp Popping Boba Machine | QHP-200 Helautomatisk Popping Boba Line
    Modell

    QHP-200, QHP-400

    Kapacitet (kg/timme)

    200 KG/H, 400 KG/H

    Elektrisk

    80kw, 98,8kw

    Maskinens längd

    12m, 14m

    CBD Gummy Machine & Köp kommersiell industriell godistillverkningsutrustning
    Modell

    QHG-40

    Kapacitet (kg/timme)

    40-50 kg/h

    Insättningshastighet (tider/min)

    15-45

    Maskinens längd

    4m

    Kraft

    6kw

    Luftkylare

    3PH

    Dubbla blad degblandare (vertikal) Till salu – Fabrik och leverantör
    Läge

    QH-30丨QH-40丨QH-60丨QH-80丨QH-120丨QH-240

    Kraft

    0,85/1,1kw/hr丨0,85/1,5kw/hr丨1,5/2,4 kw/hr丨2,2/3,3 kw/hr丨3/4,5 kw/hr丨4/7,5 kw/hr

    Blandningshastighet

    123/185 r/min丨114/230 r/min丨115/230 r/min丨125/250 r/min丨125/250 r/min丨125/250 r/min

    Skålhastighet

    12/24 r/min丨12/24 r/min丨10/20 r/min丨10/20 r/min丨10/20 r/min丨10/20 r/min

    Skålkapacitet

    34L丨48L丨68L丨84L丨122L丨240L

    Dimensionera

    750*430*990丨920*510*1050丨950*550*1100丨1050*600*1150丨1200*690*1330丨1300*880*1580

    Gummy torkbricka Till salu Fabrik & Tillverkare
    Material

    PE+PP

    Storlek

    800*600*70mm

    Vikt

    2,5 kg

    Volym

    2-3 kg

    sv_SESvenska