QHBake Candy Machine

Como é feita a gelatina em uma fábrica?

You’re probably wondering how jelly is made in a factory. After all, the basic ingredients are sugar, pectin, acid, and glucose syrup. Let’s take a look at the process in detail. Here, we’ll cover these ingredients in detail. Using a jelly making machine is a great way to start making your own jelly at home. And if you’re looking for a jelly-making machine for your own business, SaintyCo has you covered!

Pectina

The production of pectin is made by extracting it from fruit or vegetable raw materials. The plant material containing pectin is placed in a solution containing an acid or enzyme that breaks down the pectin to form soluble blocks. Then, pectin is separated from the solution by various separation processes. Depending on the degree of acidity and the desired DE content of pectin, different acid levels are used.

Pectin is an important food additive. It serves as a thickening, gelling and stabilizing agent. Most pectin used in food comes from the peel of apples and citrus fruits. It is a natural ingredient that undergoes several quality changes during the production process. This happens because pectic enzymes play a role in transforming pectin into a useful form for a variety of applications.

Açúcar

Jelly is made using pectin, a naturally occurring compound that is found in the cell walls of many plants. Pectin is variable in its chemical structure and plays a major role in the setting of jelly. The amount of sugar required for jelly manufacture is determined by the amount of pectin that is present in the fruit. The amount of sugar in a jelly recipe should be adjusted accordingly. For example, using a fruit that is only 3/4 ripe may not be necessary.

READ  Como fazer o processo de fabricação de biscoitos

A third key ingredient in jelly manufacturing is acid. The amount of acid used will depend on the level of active acidity in the fruit and its pH. It serves to neutralize the charge on the carboxyl groups in pectin. The pH of the product must be below 3.5 to enable the formation of a gel. It also helps the jelly become firmer. Most jelly manufacturers use granulated white sugar, although brown sugar may be used. While molasses can increase the sweetness of jam, it should not be used in jelly manufacturing.

Acid

The process of manufacturing acid jelly involves hydrolysis of sucrose to increase the boiling point and soluble solids concentration. Jelly is typically between 104-105degC, which is a few degrees higher than the boiling point of water. The difference in boiling point accounts for variations in atmospheric pressure and thermometer inaccuracies. The resulting jelly contains approximately 65% soluble solids. The process is not complicated, but it is critical to follow a few guidelines to achieve a consistent product.

First, it is necessary to determine how much acid to add. It can be measured by adding one teaspoon of extracted fruit juice to 1 tablespoon of rubbing alcohol. If the mixture forms a solid mass, it contains enough pectin naturally in the fruit juice to gel. If the mass is weak or insufficient, it is time to add some commercial pectin. If the amount of pectin is low, the result will be less than desired.

Xarope de glicose

Glucose syrup is a popular sweetener found in many commercial products, including jellies, jams, and fruit drinks. It is a non-crystallising substance that helps prevent crystallization in processed foods. Its non-crystalline properties also help preserve foods for longer. Jellies made with glucose syrup have smoother texture and a better shelf life than those made with other sweeteners.

READ  Como as gomas de emagrecimento são fabricadas na fábrica?

Glucose syrup is used to replace sucrose in jelly manufacturing. Higher concentrations of glucose syrup reduce the sweetness. High concentrations can also lead to dextrose crystal formation in the product, which gives the finished product an undesirable taste and mouthfeel. Glucose syrup can be used to replace sucrose in jellies, as well as to add sweetness. It can also be used as a sugar substitute for non-sweet foods.

Capping

To manufacture jelly, a jelly-making machine is required. This machine contains several parts: sensors to detect the capacity of the ingredients, tubes, and guide rails. Electricity is used to power the machine, which contains parts that control the amount of electricity and convert it into useful capacities. A cooling system removes excess heat from the ingredients. Jelly is ready to sell in the market after the entire process is completed. It has many advantages over other candies.

The ingredients used to make jelly are heated using gas, electricity, or both. Then, the resulting jelly is hermetically sealed using a glass container. The jars should be filled 90% full, leaving a head space of about one inch. Immediately after filling, jar lids should be placed loosely, and then tightened within two to three minutes. This is done to exhaust the head space and allow the jelly to form a gel. The jars are then transferred to large tanks and cooked according to the recipe.

Equipamento

The ingredients used in the factory manufacturing of jelly include citric acid, sugar, pectin, and flavoring. The next step is to remove any scum or foam from the mixture. The jelly then needs to be cooled before the next step. Before the process is complete, the jelly must be checked for quality and consistency in the laboratory. If there is no scum or foam, it will be sent to another stage for manufacturing.

READ  Sweet Success: The Factory-Made Journey of Weight Loss Gummies

The jelly making machine contains sensors that detect the capacities of the ingredients, a transport system with tubes, and guide rails. An electric unit is also installed to supply power to the machine. The electric unit contains parts that control electricity and convert it into capacities. A cooling system is also installed in the machine to remove excess heat from the ingredients. A gummy jelly candy depositing line has rows of molds ranging from one to four.

Obtenha um orçamento gratuito de nossas máquinas para biscoitos e doces

    Máquina Automática de Fabricação de Pérolas Konjac para Vendas - Fornecedor e Fabricação
    Modelo

    QH-200K 丨 QH-400K 丨 QH-400K 丨 QH-400K 丨 QH-1000K

    Capacidade

    200kg / h 丨 400kg / h 丨 600kg / h 丨 800kg / h 丨 1200Kg / h

    Comprimento da máquina

    3,5m 丨 3,5m 丨 5,5m 丨 5,5m 丨 6m

    Linha de produção automática de pirulito para venda - fábrica de máquinas de doces
    Modelo

    QH-150 丨 QH-300 丨 QH-450 丨 QH-600 丨 QH1200

    Capacidade de produção (kg / h)

    150 丨 300 丨 450 丨 600 丨 1200-2000

    Velocidade de depósito (n / min)

    30-55

    Condição de trabalho

    Temp : 20-25 ° C
    Umidade 55%

    Compre Linha de Produção Automática de Biscoitos - Máquina Industrial de Biscoitos
    Modelo

    QH-280 丨 QH-400 丨 QH-600 丨 QH-800 丨 QH-1000 丨 QH-1200

    Capacidade de produção (kg / h)

    100 丨 250 丨 500 丨 750 丨 1000 丨 1250

    Comprimento Total (mm)

    29600 丨 64500 丨 85500 丨 92500 丨 125000 丨 125000

    Temperatura de cozimento (℃)

    190-240 丨 190-240 丨 190-240 丨 190-240 丨 190-240 丨 190-240

    Compre Alimentador de Massa para Fábrica de Biscoito de Biscoito Duro
    Espessura da folha

    Ajustável

    Potência (kW)

    1.22

    Velocidade (m / min)

    1,2-1,9 m / minuto

    Comprar máquina de boba estourando | QHP-200 Linha de Popping Boba totalmente automática
    Modelo

    QHP-200, QHP-400

    Capacidade (kg / hora)

    200KG / H, 400KG / H

    Elétrico

    80kw, 98,8kw

    Comprimento da máquina

    12m, 14m

    Máquina de goma CBD e comprar equipamentos de fabricação de doces industriais comerciais
    Modelo

    QHG-40

    Capacidade (kg / hora)

    40kg-50kg / h

    Velocidade de depósito (vezes / min)

    15-45

    Comprimento da máquina

    4m

    Poder

    6kw

    Refrigerador de ar

    3PH

    Misturador de massa de lâminas duplas (vertical) para venda - fábrica e fornecedor
    Modo

    QH-30 丨 QH-40 丨 QH-60 丨 QH-80 丨 QH-120 丨 QH-240

    Poder

    0,85 / 1,1 kw / hr 丨 0,85 / 1,5kw / hr 丨 1,5 / 2,4 kw / hr 丨 2,2 / 3,3 kw / hr 丨 3 / 4,5 kw / hr 丨 4 / 7,5 kw / hr

    Velocidade de Mistura

    123/185 r / min 丨 114/230 r / min 丨 115/230 r / min 丨 125/250 r / min 丨 125/250 r / min 丨 125/250 r / min

    Velocidade da tigela

    12/24 r / min 丨 12/24 r / min 丨 10/20 r / min 丨 10/20 r / min 丨 10/20 r / min 丨 10/20 r / min

    Capacidade da tigela

    34L 丨 48L 丨 68L 丨 84L 丨 122L 丨 240L

    Dimensão

    750 * 430 * 990 丨 920 * 510 * 1050 丨 950 * 550 * 1100 丨 1050 * 600 * 1150 丨 1200 * 690 * 1330 丨 1300 * 880 * 1580

    Bandeja de secagem de goma para venda, fábrica e fabricante
    Material

    PE + PP

    Tamanho

    800 * 600 * 70 mm

    Peso

    2,5 kg

    Volume

    2-3kg

    pt_BRPortuguês do Brasil