QHBake Candy Machine

Como a goma é feita em uma fábrica?

If you’ve ever wondered how gummy candy is made, you’re not alone. Gummy candy manufacturing has several steps, from gelatin to sugar coating, and QC testing. Here’s an overview of the process. To start, ingredients are deposited in a preheated kettle. The temperature of the slurry affects the final product’s properties. After the cooking phase, the slurry is transferred from the kettle to a storage tank. In the next step, citric acid is added to the slurry, which creates a gel-like consistency. Finally, the slurry is transferred to a depositor, where it is deposited into molds that have been pre-treated with oil to prevent sticking.

Gelatina

The process begins with the evaluation of the raw materials used to create the candy. Tests are performed on these ingredients to determine their sensory properties, such as color, taste, and viscosity of liquids and solids. Manufacturers rely on these tests to produce good-quality candy. The quality of gummies depends on the consistency of the slurry, as well as the temperature and pH levels of the ingredients.

The gelatin used in gummy candy is a protein that thickens and gels in water. The texture of a gummy is determined by the amount of gelatin used in the manufacturing process. Gelatin is also thermo reversible, meaning that it becomes thinner when heated and thicker when cooled. Therefore, the quantity of gelatin in a recipe dictates the time it takes for the gummy to melt.

READ  Sleep Gummies - What Are the Ingredients Used in Sleep Gummies?

Amido

In a factory for gummy production, the starch is molded using a process called molding. The starch is then heated and used for another charge of jellies or gummies. However, there are risks associated with starch molding, such as the possibility of cross-contamination from the other functional ingredients. Furthermore, the starch used in gummy production may contain traces of other substances that may migrate into the starch powder during the subsequent process. Since cross-contamination is unavoidable in the manufacturing process, many manufacturers have moved to starch-free systems.

The starch used for gummy manufacturing is made from cornstarch and sugar. It is mixed with other ingredients and pumped to the starch molding machine, called the Mogul. The starch helps to hold the gummy sweet while drying, setting, and cooling. Moreover, it sucks the moisture out of the candy, leading to an appealing texture. The molded gummy candy is then transported on a conveyor belt. Vibrating metal screens allow the gummy candy to unmold.

Sugar coating

Sugar coating of tablets is a traditional method of drug packaging. Its origins are in the confectionery industry, but it has been used in the pharmaceutical industry since the late nineteenth century. The process involves successively deposition of aqueous sugar solution onto the tablet core. The coating material is then dried. This process results in a glossy, palatable finish that masks the taste of the tablet. To make tablets of this quality, many steps are involved, including the application of the coating material, sealing, bulking, coloring, and final polishing.

Sugar-coating tablets typically have a matte surface finish that requires a separate polishing step. Sugar-coating tablets require mixtures of waxes and other substances that prevent phase separation and sedimentation of the sugar-coating suspension. These substances lubricate and bind fines created during the coating process. The coatings are also enhanced with polishing agents, such as beeswax or carnauba wax, to improve reflectivity and colour.

READ  Como a goma macia é feita em uma fábrica?

Teste de CQ

The quality control department at a gummy manufacturing plant performs a variety of tests to ensure the highest standards of gummy candy production. These tests include water activity and citric acid levels, which help to preserve the gummy candy, as well as maintaining its integrity. Water activity levels should be between 0.55 and 0.70. The ideal water activity level for a gummy product ranges between 0.55 and 0.70. A quality control technician can easily measure water activity and ensure that the product is of a high quality.

QC testing for gummies begins with the evaluation of the raw materials used in the manufacturing process. Before any ingredients are added to a gummy product, they are tested for their sensory properties. These attributes include color, odor, taste, particle size, viscosity, pH, and other physical and chemical properties. The results of these tests are then compared to internal and external standards to ensure a high quality standard.

Hygiene considerations

While gummy bears are ready to eat, there are some hygiene considerations to make during the manufacturing process. Gummies must be clean and germ-free. To make gummies free of dust and contaminants, they are cleaned after manufacturing using a candy cleaner. However, some gummy bear manufacturing processes use excessive water to remove contaminants. Hygiene considerations when manufacturing gummies are very important, especially if you are using a large-scale production process.

One method to avoid cross-contamination and to avoid microbial growth is to use starch-free moulding processes. Starch-free moulding techniques can ensure gummies contain only the ingredients listed on the label. Hygienic and low-cost gummy moulding techniques are available from manufacturers like Tanis Confectionery. Hygiene considerations when manufacturing gummy

READ  Como são feitas as gomas de vinagre de cidra de maçã?

Obtenha um orçamento gratuito de nossas máquinas para biscoitos e doces

    Máquina Automática de Fabricação de Pérolas Konjac para Vendas - Fornecedor e Fabricação
    Modelo

    QH-200K 丨 QH-400K 丨 QH-400K 丨 QH-400K 丨 QH-1000K

    Capacidade

    200kg / h 丨 400kg / h 丨 600kg / h 丨 800kg / h 丨 1200Kg / h

    Comprimento da máquina

    3,5m 丨 3,5m 丨 5,5m 丨 5,5m 丨 6m

    Linha de produção automática de pirulito para venda - fábrica de máquinas de doces
    Modelo

    QH-150 丨 QH-300 丨 QH-450 丨 QH-600 丨 QH1200

    Capacidade de produção (kg / h)

    150 丨 300 丨 450 丨 600 丨 1200-2000

    Velocidade de depósito (n / min)

    30-55

    Condição de trabalho

    Temp : 20-25 ° C
    Umidade 55%

    Compre Linha de Produção Automática de Biscoitos - Máquina Industrial de Biscoitos
    Modelo

    QH-280 丨 QH-400 丨 QH-600 丨 QH-800 丨 QH-1000 丨 QH-1200

    Capacidade de produção (kg / h)

    100 丨 250 丨 500 丨 750 丨 1000 丨 1250

    Comprimento Total (mm)

    29600 丨 64500 丨 85500 丨 92500 丨 125000 丨 125000

    Temperatura de cozimento (℃)

    190-240 丨 190-240 丨 190-240 丨 190-240 丨 190-240 丨 190-240

    Compre Alimentador de Massa para Fábrica de Biscoito de Biscoito Duro
    Espessura da folha

    Ajustável

    Potência (kW)

    1.22

    Velocidade (m / min)

    1,2-1,9 m / minuto

    Comprar máquina de boba estourando | QHP-200 Linha de Popping Boba totalmente automática
    Modelo

    QHP-200, QHP-400

    Capacidade (kg / hora)

    200KG / H, 400KG / H

    Elétrico

    80kw, 98,8kw

    Comprimento da máquina

    12m, 14m

    Máquina de goma CBD e comprar equipamentos de fabricação de doces industriais comerciais
    Modelo

    QHG-40

    Capacidade (kg / hora)

    40kg-50kg / h

    Velocidade de depósito (vezes / min)

    15-45

    Comprimento da máquina

    4m

    Poder

    6kw

    Refrigerador de ar

    3PH

    Misturador de massa de lâminas duplas (vertical) para venda - fábrica e fornecedor
    Modo

    QH-30 丨 QH-40 丨 QH-60 丨 QH-80 丨 QH-120 丨 QH-240

    Poder

    0,85 / 1,1 kw / hr 丨 0,85 / 1,5kw / hr 丨 1,5 / 2,4 kw / hr 丨 2,2 / 3,3 kw / hr 丨 3 / 4,5 kw / hr 丨 4 / 7,5 kw / hr

    Velocidade de Mistura

    123/185 r / min 丨 114/230 r / min 丨 115/230 r / min 丨 125/250 r / min 丨 125/250 r / min 丨 125/250 r / min

    Velocidade da tigela

    12/24 r / min 丨 12/24 r / min 丨 10/20 r / min 丨 10/20 r / min 丨 10/20 r / min 丨 10/20 r / min

    Capacidade da tigela

    34L 丨 48L 丨 68L 丨 84L 丨 122L 丨 240L

    Dimensão

    750 * 430 * 990 丨 920 * 510 * 1050 丨 950 * 550 * 1100 丨 1050 * 600 * 1150 丨 1200 * 690 * 1330 丨 1300 * 880 * 1580

    Bandeja de secagem de goma para venda, fábrica e fabricante
    Material

    PE + PP

    Tamanho

    800 * 600 * 70 mm

    Peso

    2,5 kg

    Volume

    2-3kg

    Não

    Tempo de expiração do cookie (minutos)

    Produtos

    ÍndiceToggle Table of Content

    pt_BRPortuguês do Brasil