QHBake Candy Machine

Come viene prodotta la gomma morbida in una fabbrica?

To make this candy, gelatin is used. This substance gives gummy candies their taste. Other ingredients used in the manufacturing process are starch and natural or artificial flavourings. During the manufacturing process, water activity is measured to detect problems with the batch. The first step is called cooking, where the ingredients are combined in a kettle and made into a slurry. This mixture is then transferred to the storage mixing tank. To give the finished product a gel texture, citric acid is added to the slurry to adjust the pH.

Gelatin gives gummy candy its taste

A soft gummy candy’s flavor is given by gelatin, which is extracted from pork skin. Although gelatin is not a particularly healthy food, it is actually very nutritious for our joints and skin. In fact, adults can safely consume 20 to 30 grams of gelatin per day. However, before eating gelatin-based candy, you should make sure it has been thoroughly soaked in cold water.

While gelatin is a primary ingredient of gummy candy, other ingredients are used to add flavor and color. Various kinds of sugar are used for sweetening, including fructose and sucrose. Corn syrup is often used to prevent sugar from crystallizing and to maintain moisture levels in the candy. In addition, additives like sulfur dioxide and ethylenediamine sulfate prevent microbial growth.

Starch molding process

There are a number of things to consider when molding soft gummies with starch. The consistency of the resulting confection will depend on the moisture content. A typical starch gummy’s moisture content should be between 5.5 percent and 7.0 percent. While some specialty items can be made with less moisture, this is not always the case. The right balance of starch and water is essential for successful confectionery production.

READ  Come vengono prodotti i vermi gommosi in una fabbrica

The main steps in the starch molding process for soft gummies are described below. The gummy candy batch is pumped into a starch molding machine called a Mogul. The Mogul automates several tasks, including cooling the candy ingredients. Once the trays have cooled, they are then sent through a conveyor belt to the final assembly, the starch buck. From here, the trays are emptied and passed through a sieve, which is a metal screen, to remove excess starch. The remaining pieces of candy are then screened to remove any visible excess starch, and are packaged using specific packaging specifications.

Natural and artificial flavourings

In a survey of consumers, nearly half of adults preferred a product’s nutritional label to include the phrase “made with real fruit juice.” According to Mintel’s Marcia Mogelonsky, global market analyst, the addition of real fruit juice has resulted in exotic flavors such as goji berry, guava, pink grapefruit, and others. However, consumers have mixed feelings about artificial flavourings and colors.

Although the FDA doesn’t require manufacturers to list the ingredients in a product that contains “natural flavor,” the company must provide a disclaimer below the ingredient list stating what’s in the product. Alternatively, consumers can contact the manufacturer of the product to inquire about its ingredients. Ultimately, consumers should read the labels carefully before making a purchasing decision. But what are the different kinds of artificial flavourings, and how can consumers differentiate between them?

Typically, a sugar-free gummi must share the same properties as their sugar-based counterparts, such as chewiness, bulk, and non-stickiness. Often, the sweeteners used in these products are polyols. Among the most common polyols in gummi confections are sorbitol and hydrogenated starch hydrolyzates.

READ  Come vengono prodotte le caramelle gommose alla vitamina in una fabbrica?

Drying process

The first step in the manufacture of gummy candies is cooking the slurry. This is achieved by heating the syrup in a steam or electrical boiler. The method of heating depends on the manufacturing process and the amount of money available for it. High-pectin ingredients such as fruit juice or molasses require homogenization. Using a steam boiler is more affordable. It is also more efficient than electric heating. The ingredients are then delivered to the molding trays, where they are screened and tested. Finally, the trays are moved to the filling section, where a fluid composition is filled into the impressions.

Using the right ingredients is crucial for the successful production of gummy candies. While selecting gelatin, consider the level of total soluble solids. The gelatin concentration must be high enough to enable the production of gummy candies with the right consistency. In addition, the humectant level should be high enough to prevent graining. Stringiness, on the other hand, can be caused by high syrup solids, degraded gelatin, and low depositing temperatures.

Richiedi un preventivo gratuito dei nostri macchinari per biscotti e caramelle

    Macchina automatica per la produzione di perle Konjac per la vendita - Fornitore e produzione
    Modello

    QH-200K, QH-400K, QH-400K, QH-400K, QH-1000K

    Capacità

    200kg/h 丨400kg/h丨600kg/h丨800kg/h 丨1200Kg/h

    Lunghezza macchina

    3,5 m丨 3,5 m 丨 5,5 m丨 5,5 m丨 6 m

    Linea di produzione automatica di lecca-lecca in vendita - Fabbrica di macchine per dolci
    Modello

    QH-150丨QH-300丨QH-450丨QH-600丨QH1200

    Capacità di produzione (kg/h)

    150 丨300丨450丨600 丨1200-2000

    Velocità di deposito (n/min)

    30-55

    Condizioni di lavoro

    Temperatura:20-25°C
    Umidità 55%

    Acquista la linea di produzione automatica di biscotti - Macchina industriale per biscotti
    Modello

    QH-280, QH-400, QH-600, QH-800, QH-1000, QH-1200

    Capacità di produzione (kg/h)

    100 丨 250丨500 丨750丨1000 丨1250

    Lunghezza totale (millimetro)

    29600丨64500丨85500丨92500丨125000丨125000

    Temperatura di cottura (℃)

    190-240 丨190-240丨190-240丨190-240 丨190-240丨190-240

    Acquista un alimentatore per pasta per biscotti duri Cracker Biscuit Factory
    Spessore della lamiera

    Regolabile

    Potenza (kW)

    1.22

    Velocità (m/min)

    1,2-1,9 m/minuto

    Acquista Popping Boba Machine | QHP-200 Linea Boba Popping Automatica Completa
    Modello

    QHP-200, QHP-400

    Portata (kg/ora)

    200KG/H, 400KG/H

    Elettrico

    80kw, 98,8kw

    Lunghezza macchina

    12m, 14m

    Impastatrice a doppia lama (verticale) In vendita - Fabbrica e fornitore
    Modalità

    QH-30丨QH-40丨QH-60丨QH-80丨QH-120丨QH-240

    Potenza

    0,85/1,1 kw/ora丨0,85/1,5 kw/ora丨1,5/2,4 kw/ora丨2,2/3,3 kw/ora丨3/4,5 kw/ora丨4/7,5 kw/ora

    Velocità di miscelazione

    123/185 giri/min丨114/230 giri/min丨115/230 giri/min丨125/250 giri/min丨125/250 giri/min丨125/250 giri/min

    Velocità della ciotola

    12/24 giri/min丨12/24 giri/min丨10/20 giri/min丨10/20 giri/min丨10/20 giri/min丨10/20 giri/min

    Capacità della ciotola

    34L丨48L丨68L丨84L丨122L丨240L

    Dimensione

    750*430*990丨920*510*1050丨950*550*1100丨1050*600*1150丨1200*690*1330丨1300*880*1580

    Vassoio di essiccazione gommoso in vendita fabbrica e produttore
    Materiale

    PE+PP

    Taglia

    800*600*70mm

    Il peso

    2,5 kg

    Volume

    2-3kg

    Meta chiave.

    Articoli recenti

    Prodotti

    SommarioToggle Table of Content

    it_ITItaliano