QHBake 캔디 머신

공장에서 소프트 젤리는 어떻게 만들어지나요?

To make this candy, gelatin is used. This substance gives gummy candies their taste. Other ingredients used in the manufacturing process are starch and natural or artificial flavourings. During the manufacturing process, water activity is measured to detect problems with the batch. The first step is called cooking, where the ingredients are combined in a kettle and made into a slurry. This mixture is then transferred to the storage mixing tank. To give the finished product a gel texture, citric acid is added to the slurry to adjust the pH.

Gelatin gives gummy candy its taste

A soft gummy candy’s flavor is given by gelatin, which is extracted from pork skin. Although gelatin is not a particularly healthy food, it is actually very nutritious for our joints and skin. In fact, adults can safely consume 20 to 30 grams of gelatin per day. However, before eating gelatin-based candy, you should make sure it has been thoroughly soaked in cold water.

While gelatin is a primary ingredient of gummy candy, other ingredients are used to add flavor and color. Various kinds of sugar are used for sweetening, including fructose and sucrose. Corn syrup is often used to prevent sugar from crystallizing and to maintain moisture levels in the candy. In addition, additives like sulfur dioxide and ethylenediamine sulfate prevent microbial growth.

Starch molding process

There are a number of things to consider when molding soft gummies with starch. The consistency of the resulting confection will depend on the moisture content. A typical starch gummy’s moisture content should be between 5.5 percent and 7.0 percent. While some specialty items can be made with less moisture, this is not always the case. The right balance of starch and water is essential for successful confectionery production.

The main steps in the starch molding process for soft gummies are described below. The gummy candy batch is pumped into a starch molding machine called a Mogul. The Mogul automates several tasks, including cooling the candy ingredients. Once the trays have cooled, they are then sent through a conveyor belt to the final assembly, the starch buck. From here, the trays are emptied and passed through a sieve, which is a metal screen, to remove excess starch. The remaining pieces of candy are then screened to remove any visible excess starch, and are packaged using specific packaging specifications.

Natural and artificial flavourings

In a survey of consumers, nearly half of adults preferred a product’s nutritional label to include the phrase “made with real fruit juice.” According to Mintel’s Marcia Mogelonsky, global market analyst, the addition of real fruit juice has resulted in exotic flavors such as goji berry, guava, pink grapefruit, and others. However, consumers have mixed feelings about artificial flavourings and colors.

Although the FDA doesn’t require manufacturers to list the ingredients in a product that contains “natural flavor,” the company must provide a disclaimer below the ingredient list stating what’s in the product. Alternatively, consumers can contact the manufacturer of the product to inquire about its ingredients. Ultimately, consumers should read the labels carefully before making a purchasing decision. But what are the different kinds of artificial flavourings, and how can consumers differentiate between them?

Typically, a sugar-free gummi must share the same properties as their sugar-based counterparts, such as chewiness, bulk, and non-stickiness. Often, the sweeteners used in these products are polyols. Among the most common polyols in gummi confections are sorbitol and hydrogenated starch hydrolyzates.

Drying process

The first step in the manufacture of gummy candies is cooking the slurry. This is achieved by heating the syrup in a steam or electrical boiler. The method of heating depends on the manufacturing process and the amount of money available for it. High-pectin ingredients such as fruit juice or molasses require homogenization. Using a steam boiler is more affordable. It is also more efficient than electric heating. The ingredients are then delivered to the molding trays, where they are screened and tested. Finally, the trays are moved to the filling section, where a fluid composition is filled into the impressions.

Using the right ingredients is crucial for the successful production of gummy candies. While selecting gelatin, consider the level of total soluble solids. The gelatin concentration must be high enough to enable the production of gummy candies with the right consistency. In addition, the humectant level should be high enough to prevent graining. Stringiness, on the other hand, can be caused by high syrup solids, degraded gelatin, and low depositing temperatures.

비스킷 및 사탕 기계 무료 견적 받기

    자동 곤약 진주 제조 기계 판매 – 공급 업체 및 제조
    모델

    QH-200K 丨 QH-400K 丨 QH-400K 丨 QH-400K 丨 QH-1000K

    생산 능력

    200kg / h 丨 400kg / h 丨 600kg / h 丨 800kg / h 丨 1200Kg / h

    기계 길이

    3.5m 丨 3.5m 丨 5.5m 丨 5.5m 丨 6m

    판매용 자동 롤리팝 생산 라인 - 사탕 기계 공장
    모델

    QH-150 丨 QH-300 丨 QH-450 丨 QH-600 丨 QH1200

    생산 능력 (kg / h)

    150 만 300 만 450 만 600 만 1200 ~ 2000 년

    입금 속도 (n / min)

    30-55

    작업 조건

    온도 : 20-25 ° C
    습도 55%

    자동 비스킷 생산 라인 구매 – 산업용 비스킷 기계
    모델

    QH-280 丨 QH-400 丨 QH-600 丨 QH-800 丨 QH-1000 丨 QH-1200

    생산 능력 (kg / h)

    100 丨 250 丨 500 丨 750 丨 1000 丨 1250

    총 길이 (mm)

    29600 丨 64500 丨 85500 丨 92500 丨 125000 丨 125000

    소성 온도 (℃)

    190-240 丨 190-240 丨 190-240 丨 190-240 丨 190-240 丨 190-240

    하드 비스킷 크래커 비스킷 공장용 반죽 피더 구매
    판금 두께

    조절할 수 있는

    전력 (kW)

    1.22

    속도 (m / min)

    1.2-1.9m / 분

    터지는 보바 머신 구매 | QHP-200 전자동 팝핑 보바 라인
    모델

    QHP-200, QHP-400

    용량 (kg / 시간)

    200KG/H, 400KG/H

    전기 같은

    80kw, 98.8kw

    기계 길이

    12m, 14m

    CBD 거미 기계 및 상업용 산업용 캔디 제조 장비 구매
    모델

    QHG-40

    용량 (kg / 시간)

    40kg-50kg / h

    입금 속도 (회 / 분)

    15-45

    기계 길이

    4 분

    6kw

    에어 쿨러

    3PH

    이중 블레이드 반죽 믹서 (수직) 판매 – 공장 및 공급 업체
    방법

    QH-30 丨 QH-40 丨 QH-60 丨 QH-80 丨 QH-120 丨 QH-240

    0.85 / 1.1kw / hr 丨 0.85 / 1.5kw / hr 丨 1.5 / 2.4kw / hr 丨 2.2 / 3.3kw / hr 丨 3 / 4.5kw / hr 丨 4 / 7.5kw / hr

    혼합 속도

    123 / 185r / min 丨 114/230 r / min 丨 115/230 r / min 丨 125/250 r / min 丨 125/250 r / min 丨 125/250 r / min

    보울 속도

    12/24 r / min 丨 12/24 r / min 丨 10/20 r / min 丨 10/20 r / min 丨 10/20 r / min 丨 10/20 r / min

    그릇 용량

    34L 丨 48L 丨 68L 丨 84L 丨 122L 丨 240L

    치수

    750 * 430 * 990 丨 920 * 510 * 1050 丨 950 * 550 * 1100 丨 1050 * 600 * 1150 丨 1200 * 690 * 1330 丨 1300 * 880 * 1580

    판매용 젤리 건조 트레이 공장 및 제조업체
    재료

    PE + PP

    크기

    800 * 600 * 70mm

    무게

    2.5kg

    음량

    2-3kg

    게시 됨
    ko_KR한국어