QHBake Candy Machine

¿Cómo se fabrica Soft Gummy en fábrica?

To answer the question of how is soft gummy manufactured in a factory, let’s look at the manufacturing process. First, we will discuss the ingredients used and the composition of the final product. The next step involves quality control and determining the final product’s shape. Next, we’ll discuss the Gelatin used in the production process. Once we understand what exactly goes into the creation of gummy bears, we can move on to the manufacturing process itself.

Compounding process

The Compounding process for soft gummies involves preparing ingredients and using them to produce various products. The incoming raw materials are evaluated and tested in a QC laboratory. They are characterized based on their color, odor, and taste. The particle size of solids, viscosity, and pH of the liquids are also inspected. The results of the sensory tests are used to produce gummy candy, and these tests are relied upon by manufacturers.

The ingredients are then mixed and then pumped to the Mogul, which performs multiple functions in the Compounding process for soft gummies. The first stage of the process involves transferring the trays containing the ingredients to the Mogul. The trays are then sent through a conveyor belt to the final assembly, known as the starch buck. Then, each tray is emptied into a sieve. This screen removes any excess starch, and the finished candies move down a conveyor belt to the filling and decoration sections. Finally, the candy is packaged in the designated packaging, or boxed for sale.


Among the many ingredients of a soft gummy manufactured in a factory, pectin stands out for its versatility. As an animal-derived product, pectin is often used as a replacement for gelatin and other animal-derived ingredients. Pectin’s high thermostability and ability to gel at different temperatures force manufacturers to adapt their manufacturing processes. Using a buffer salt, such as sodium citrate, stabilizes the pH of a VMS gummy and allows a factory to redo a production run if the pectin is inconsistent.

To make a gummy, the first step is to mix and prepare a premix. A premix typically consists of glucose, sugar, and pectin. These ingredients are mixed and weighed before they are pumped through a vacuum into a vessel. Once in the vessel, the premix is pumped through a stainless steel heat exchanger. Once the mixture is ready, it moves onto the mold-impression section. Here, the gummy is finished by coating the sides with sugar.

Control de calidad

While selecting a soft gummy manufacturing system, safety should always be a priority. A starch-based gummy production system could pose a fire hazard. Therefore, new moguls sold in Europe must meet strict ATEX certification codes. The same is true for businesses operating in North America. The following points should be considered when choosing a soft gummy manufacturing system:

Texture Profile Analysis – This technique enables the monitoring of changes in texture and gel strength. The results can be used to adjust the drying time, decrease the production time, and optimize texture stability. By using TPA, manufacturers can measure the texture of gummy jellies without posing a risk of breakage. Texture Profile Analysis is particularly useful for determining stabilization time. It can also be used to improve manufacturing speed.


Gelatin is the primary gelling agent used in American gummies. As it reaches a particular temperature, it forms a triple-helical coil, which traps water. As gelatin gels at higher temperatures, the chain becomes longer and the concentration increases, making the gummy chewier. But this process comes with a few drawbacks. This article will discuss a few of these challenges and offer solutions.

To start with, liquid candy compositions contain a high proportion of water, often about twenty percent or more. After casting, the water content drops to twenty percent or less. This process is known as blooming. However, gelatin with a low bloom value is not ideal for gummy confections, as it does not provide the desired texture or bite. The best gelatin will have a high bloom value, which is between two hundred and three hundred percent.


Pectin is an ingredient found in many plant-based foods. It’s used in soft gummies for several reasons, including its ability to provide a smooth, viscous body, fast flavor release, and shiny appearance. It also has potential health benefits and is vegan-friendly. Consumers’ aesthetic demands are further satisfied by gummies that have reduced sugar content, making pectin a desirable ingredient for many manufacturers.

Pectin is commonly used in making gummies, but it’s not the only ingredient used in the production process. Its production process can be environmentally friendly. Pectin is added to the raw materials early in the process to ensure its proper dispersion. This will ensure the pectin is fully hydrated and the pH level is the proper one. The process will be more efficient if the manufacturer is able to utilize pectin in the factory.


The conventional method of gummy candy oiling relies on operators applying the coating by eye, which can result in over or under-coating. The tna intelli-flav OMS 5 is a highly accurate control system that can be programmed to provide repeatable gummy coating, while improving the nutritional profile of the end product. Advanced control also offers the advantage of improving production speed and transparency.

Unlike traditional jelly manufacturing processes, starch molding is a cheaper and faster method for producing gummies. Starch molding is a versatile method that can produce a variety of shapes and flavours, while still allowing for low cost production. Here are a few tips on how to improve the texture of gummies:

es_MXEspañol de México